Portable Bluetooth Speaker
Charge

Sound Bar Quick Guide

Charging the Battery

The speaker is a built-in battery. Make sure to charge the battery sufficiently before use.

  1. a Connect the USB cable to DC IN port of the speaker.
  2. b Connect the supplied USB cable to the AC adapter (not supplied).
  3. c Plug the AC adapter into an AC outlet.

138688.png

125010.png

133317.png

133308.png Note
  • It takes about 3 hours to fully charge the speaker. The charging time may differ depending on the battery status or the speaker operation status.
  • Once the battery is fully charged, you can use the speaker for about 29 hours.
  • Operation time may vary depending on the battery or operation status.

138843.png

> CAUTION

AC adapter is not supplied. It is recommended that you use the 5 V / 9 V AC PD adapter (more than 3 A) with this speaker. If you do not use the recommended adapter, charging time may differ.

  • Do not expose the speaker to liquids while charging or without disconnecting the cables. If exposed to liquid, do not charge the speaker until it is completely dry and clean.
  • Charging while wet may damage the speaker.
  • If exposed to chemicals and salt from a pool or ocean, dry and clean thoroughly.
  • Otherwise, it may cause a malfunction.
  • If the speaker cannot be charged due to foreign substances or moisture, the Lighting Indicator and Dot LED alternates between amber and blue with a emergency sound.
  • If there is a problem with the PD adapter, charging will stop, the Dot LED alternates between white and red, and the Lighting Indicator alternates between white and red for 3 seconds.