Wi-Fi SOUND BAR
Installing the Product with a LG TV

Sound Bar Quick Guide

Checking before installing with the TV

You can install this product with the LG TV. There are two ways of installation: standing and wall mounting available.

Please check the following first.

  • Available models as below (55 inch, 65 inch, and 77 inch)
  • OLED77C2/OLED65C2/OLED55C2
  • OLED77C3/OLED65C3/OLED55C3
  • More than two persons needed
  • When assembling, ensure that all of the provided screws are attached. If the screws are not fully tightened, the product may tilt or tip over, resulting in damage. Tightening the screws with excessive force may cause them to come off due to abrasion of the screw joint.
  • It may be difficult to connect external devices and cables after installation. First, connect an external device with the proper connection cable to the product before assembly.
  • Please note the following when you mount the product to the wall. Product damage or injury may occur during the process.
  • Do not put objects on top of the wall-mounted product.
  • Secure the product firmly to the wall using the fixing screws so that it does not fall off.
  • Ensure it is out of the reach of children. Pulling or shaking the mounted product may cause it to fall.
  • If necessary, purchase HDMI cables, an optical cable to connect the sound bar.

143334.png

> Caution

  • As the product is heavy, a group of two or more should work together to erect or move the product.
  • Otherwise, the product may fall, causing injury or product damage.
  • Prevent children from hanging on the TV or climbing it.
  • Otherwise, the TV may fall over, causing injury or death.
  • Do not install the product in an unstable location, a location with vibration, or a location that does not support the product safely, such as on top of a shaky shelf or on a slope.
  • Otherwise, the product may fall or turn over, causing injury or product malfunction.
  • Put the product on a flat hard surface.
  • Otherwise, the product may fall over, causing injury.
  • Make sure that you do not damage the exterior of the product when moving or handling the product installed with a stand.
  • If there is any dirt or fingerprint on the product exterior, only wipe the area with the dirt or fingerprint lightly.
  • Do not apply excessive force when removing the dirt. Excessive force may produce scratches or discoloration of the product exterior.
  • When assembling a stand to the product, place the product on a table or a flat surface in a way that its screen faces downwards. When doing so, first place a soft cushiony cloth on the surface to prevent the screen from being damaged.
  • When assembling a stand to the product, make sure that all screws are engaged to the end. (If not, the product may fall over after it was installed.) Do not tighten the screws with excessive force. Otherwise, the screws may become loose or fall out due to the wear and tear of the screwed parts.
  • Before installing a TV synergy bracket, disassemble the stand or wall bracket of the TV in the reverse order of assembly. For how to assemble a stand or wall bracket to the TV, refer to the TV manual.

Components for installing with the TV

Sound bar

127231.png

Spacer

  • for 77 inch TV
  • for 55 inch and 65 inch TV

127277.png

TV synergy bracket (Front)

127332.png

TV synergy bracket (Rear)

127297.png

Screws a

131809.png

Screws b

131817.png

143361.png

> Caution

  • Never re-use the screws from the TV stand. Use only the screws provided with the sound bar.