Wi-Fi SOUND BAR
Installation

Sound Bar Quick Guide

Connecting with a Smartphone via Wi-Fi

LG Sound Bar app allows you to connect the product to the network and to control the product.

120760.png

120771.png

Please check the following first.

  • Do you have a wireless router?
  • To connect your smartphone and the product via Wi-Fi, you must have a wireless router that is connected to the internet.
  • Make sure that they are both connected to the same Wi-Fi network.
  • If the wireless router signal is weak, it may not be able to connect. Move the router closer to the sound bar or reposition it away from obstacles.
  • Does your smartphone have Bluetooth enabled?
  • Enable Bluetooth on your smartphone.
  • If Bluetooth is enabled, you can easily connect to Wi-Fi. If Bluetooth is disabled, the product may not be registered on the LG Sound Bar app.
  • The LG Sound Bar app is available in the versions listed below.
  • Android™ OS: Version 6.0 or higher
  • iOS OS: Version 12 or higher
  • Minimum supported versions for each OS may change later.

Installing the app

Install the LG Sound Bar app on your smartphone. To install the LG Sound Bar app, you can scan the QR code with a QR code scan app or download on Google Play or the App Store.

Downloading with a QR code

  1. a Scan the QR code below with a QR code scan app.
  2. b You will be directed to a page where you can download the LG Sound Bar app. Tap the app to install it.

LG%20Sound%20Bar-Android_QR%20Code_15.png

(Android Phone OS)

LG%20Sound%20Bar-iOS_QR%20code_15_V2.png

(iPhone OS)

120788.png

Downloading on Google Play or App Store

Go to the Google Play or the App Store on your smartphone and search for the LG Sound Bar app to install it.

120790.png

(Android™ Phone)

120797.png

(iPhone)

120803.png

120542.png

120536.png Note
  • Settings menu items may vary depending on the smartphone manufacturer and OS.
  • Google, Android, Google Play, Google Home and Chromecast built-in are trademarks of Google LLC.

Connecting with a Smartphone via LG Sound Bar app

You must connect the product to the smartphone via Wi-Fi on the LG Sound Bar app to use network services.

The app installation method differs depending on the smartphone.

  1. a Find and tap the LG Sound Bar app installed on your smartphone.
  2. b Follow the instructions on the LG Sound Bar app. You will need to agree to the terms of service, Chromecast guide screen, and location permission settings. Turn on Wi-Fi and Bluetooth.
  3. c Select the product to connect. This product will be indicated as “LG_Speaker_S95QR_XXXX”.

120818.png

120838.png

  1. d Select a Wi-Fi network and enter the password.

120830.png

120840.png

  1. e After completing product connection on the LG Sound Bar app, you will see “CONNECTED” appear on the status display on the product.

120517.png

120512.png Note
  • If the router password contains some special characters (such as ` ' " + / \ ; : - _ ^ & () <>) or emoticons, the sound bar may not be connected. It is recommended to set a password using a combination of English letters and numbers.
  • It is recommended to set the security type of the wireless router to WPA2.
  • You can register the product on Google Home app. For more information, please visit http://www.google.com/cast/setup/.
  • You can create a speaker group with Google Home app and add up to 4 devices as a speaker group. Adding too many devices may become inconvenient when listening to music.
  • If you want to check or change the registered home’s nickname or the product name, connect to the Google Home app and tap the Device Settings120844.pngbutton.
  • You cannot configure or control the product with the LG ThinQ app.