Wi-Fi SOUND BAR
Installation

Sound Bar Quick Guide

Connecting the Product

You can enjoy a richer sound by connecting the sound bar to the wireless subwoofer.

Connecting the wireless subwoofer automatically

After completing installation, the wireless subwoofer will automatically be connected to the sound bar. Connect the sound bar to the subwoofer in the following order.

  1. a Plug the power cable into the wireless subwoofer.
  2. b Plug the power cable connected to the wireless subwoofer into an outlet.
  3. c Plug the power cable into the AC adapter.
  4. d Connect the AC adapter cable to the DC IN (AC adapter input) terminal on the back of the product.
  5. e Plug the power cable connected to the AC adapter into an outlet.

120083.png

122911.png

120091.png

  1. f When the connection is automatically established, you will see the LED on the wireless subwoofer light up in green.

122945.png

122940.png Note

  • Make sure to use the provided AC adapter. Using other AC adapters may lead to malfunction and will forfeit the product warranty.

Checking the connection with the LED on the wireless subwoofer

You can check the connection status by looking at the LED on the wireless subwoofer.

LED Colour

Status

Blinking green

Connecting in progress

Green

Connected successfully

Red

Bad connection, or the subwoofer is in standby

Off

Power cable not connected

Connecting the wireless subwoofer manually

If you see a red LED on the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If this is the case, connect them in the following order.

  1. a Press the Power86679.png button on the sound bar to turn it off.
  2. b Press the Pairing button on the wireless subwoofer. Check if the LED on the subwoofer is blinking green. If you still see a red LED on the wireless subwoofer, press and hold the button on the back of the subwoofer again.

120103.png

120113.png

  1. c Press the Power86690.png button on the sound bar to turn it on.
  2. d When the connection is established, you will see the LED light on the wireless subwoofer light up in green.

120135.png

120145.png Note

  • Install the sound bar as close to the wireless subwoofer as possible. The closer the distance between the sound bar and the wireless subwoofer, the better the sound quality.
  • Please ensure there are no obstacles between the sound bar and the wireless subwoofer.
  • To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless subwoofer and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers, microwave ovens, etc.).

120614.png

Connecting the rear speakers to the wireless receiver (SPQ8-S, sold separately)

Automatic connection

After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the sound bar to the wireless receiver in the following order.

  1. a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right). Connect the black striped cable to the negative terminal and the other cable to the positive terminal.
  2. b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.

Receiver Terminal Colour

Speaker Position

Blue

L Left rear

Grey

R Right rear

120629.png

120641.png

  1. c Plug the power cable into the wireless receiver.
  2. d Plug the power cable connected to the wireless receiver into an outlet.
  3. e Press the Power86724.png button on the sound bar to turn it on.
  4. f When the connection is automatically established, you will see the LED on the front of the wireless receiver light up in green.

120608.png

120602.png Note

  • Please only use the speakers provided with the product. Using other speakers may cause malfunction.
  • Connect the speaker cables to the corresponding terminals. Connect to the positive cable to the positive terminal and the negative cable to the negative terminal. An incorrectly connected cable will distort the sound or produce no bass.
  • Connect the product to the speakers and cables provided at the time of product purchase.
  • If you connect the product to speakers or cables other than those provided at the time of product purchase, there can be a deterioration of sound quality or a speaker malfunction.
  • When you connect speakers to the product, connect only one speaker to the output port that fits the speaker.
  • If you connect multiple speakers to one output port, it may cause a product or speaker malfunction.

Checking connection status with the LED colour

You can check the connection status with the LED on the front of the wireless receiver.

LED Colour

Status

Blinking green

Connecting In progress

Green

Connected successfully

Red

Bad connection, or the receiver is in standby

Off

Power cable not connected

Manual connection

If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the receiver. If this is the case, connect them in the following order.

  1. a Press the Power86732.png button on the sound bar to turn it off.
  2. b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless receiver is blinking green.

120650.png

120659.png

  1. c Press the Power86753.png button on the sound bar to turn it on.
  2. d When the connection is established, you will see the LED light on the front of the wireless receiver light up green.

120587.png

120579.png Note

  • Keep the rear speakers at least 30 cm away from the TV or monitor.
  • To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless receiver and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers, microwave ovens, etc.).

120666.png

Attaching the ferrite core (optional)

A ferrite core may not be provided depending on national standards.

Attaching the ferrite core to the speaker cables

Attach the ferrite core to the cables to reduce radio noise.

  1. a Pull Part [a] to open the ferrite core.
  2. b Wind the wireless receiver's speaker cables twice around the ferrite core. A distance of about 18 cm is required between the wireless receiver and the ferrite core.
  3. c Close the ferrite core until you hear a click.

120677.png

120687.png

Setting up surround sound

The surround sound function allows you to hear immersive 3D sound produced by multiple audio channels from the speakers, regardless of the channels in the originally recorded content.

For example, if you listen to music recorded in 2.0 channels with standard sound effects while the wireless rear speakers are connected, you can hear the following difference.

120690.png

When the surround sound is off

120702.png

When the surround sound is on

120713.png

120563.png

120558.png Note

  • Speaker positions are as follows.
  1. A Front speakers
  2. B Centre speaker
  3. C Top speakers for overhead sound
  4. D Top centre speaker for overhead sound
  5. E Subwoofer
  6. F Rear speakers

Turning surround sound on/off

  1. a Press Settings90136.png button. LED2 blinks white.

120717.png

120752.png

  1. b While the LED2 is blinking, press Right button once to choose the surround sound setting.

123831.png

120754.png

  1. c While the LED2 is blinking, press Up/Down button. If the surround sound setting is on, LED1 blinks white. If the surround setting is off, LED3 blinks white.

123848.png

(On)

123853.png

(Off)

120756.png

Speaker sound based on input channels

Sound Effects

Input

Output

Rear speakers not connected

Rear speakers connected

AI SOUND PRO

Sound customised with artificial intelligence

2.0 channels

122716.png

122711.png

5.1 channels

7.1 channels or more

7.1.4 channels

STANDARD

You can enjoy optimised sound.

2.0 channels

123184.png

123212.png

5.1 channels

123190.png

123218.png

7.1 channels or more

123196.png

123437.png

7.1.4 channels

123203.png

123240.png

MUSIC

You can enjoy better sound optimised for music.

2.0 channels

123556.png

123542.png

5.1 channels

123537.png

123531.png

7.1 channels or more

123526.png

123518.png

7.1.4 channels

123513.png

123508.png

CINEMA

Cinematic 3D sound

2.0 channels

123580.png

123585.png

5.1 channels

7.1 channels or more

7.1.4 channels

CLEAR VOICE PRO

Voice sound clear, improving the quality of voice sound

2.0 channels

123613.png

123608.png

5.1 channels

7.1 channels or more

7.1.4 channels

SPORTS

Realistic sound like in a stadium

2.0 channels

123643.png

123637.png

5.1 channels

7.1 channels or more

7.1.4 channels

GAME

Optimised sound for game

2.0 channels

123660.png

123655.png

5.1 channels

7.1 channels or more

7.1.4 channels

BASS BLAST (BASS BLAST+)

Sound with reinforced bass

2.0 channels

123673.png

123667.png

5.1 channels

7.1 channels or more

7.1.4 channels