Portable Bluetooth Speaker
Things to Check before Reporting Malfunction

Sound Bar Quick Guide

Troubleshooting

If you experience the following symptoms while using the product, please check them again. They may not be malfunctions.

Symptom

Cause and Solution

Power is not supplied.

  • Is the power cord plugged into the outlet properly?
  • Connect the power plug to the outlet correctly.

There is no sound or the sound is distorted.

  • The volume of product or the connected Bluetooth device may be set to the minimum. Adjust the volume of product or the connected Bluetooth device to the appropriate level.
  • Using an external device with the maximised sound may distort the sound. Lower the volume of the external device to use.

The USB storage device is not recognised.

  • The product may not support the file system of the USB storage device. Format the USB storage device and reconnect it. When formatting, check the supported USB storage device format available on the product and select an appropriate file system. ([ See “Connecting the product to a USB storage device on page 23.)

Bluetooth connection failed.

  • Check if the Bluetooth setting is enabled.
  • Turn off the Bluetooth setting and on again on the Bluetooth device.
  • Make sure there are no obstacles between product and the Bluetooth device.
  • Bluetooth pairing (connecting) may fail depending on the Bluetooth device type and the surrounding environment.

The product does not operate normally.

  • Use this product in a place where the temperature and humidity are not too high or low. If the problem continues, contact LG Electronics’ Customer Service Centre.

The above solutions do not work.

  • Initializes the settings of the product. Press and hold the Function26038.png button on the product for 7 seconds or longer. ([ See “Initializing the Software on page 26.)

Appendix