Sound Bar Quick Guide

Connecting the Product

Connecting the rear speakers to the wireless receiver

Automatic connection

After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the sound bar to the wireless receiver in the following order.

1. a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right). Connect the black striped cable to the negative terminal and the other cable to the positive terminal.
2. b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.

Receiver Terminal Colour	Speaker Position
Blue	L Left rear
Grey	R Right rear

1. c Plug the power cable into the wireless receiver.
2. d Plug the power cable connected to the wireless receiver into an outlet.
3. e Press the Power button on the sound bar to turn it on.
4. f When the connection is automatically established, you will see the LED on the front of the wireless receiver light up green.

Note

Please only use the speakers provided with the product. Using other speakers may cause malfunction. Connect the speaker cables to the corresponding terminals. Connect to the positive cable to the positive terminal and the negative cable to the negative terminal. An incorrectly connected cable will distort the sound or produce no bass.

Checking connection status with the LED colour

You can check the connection status with the LED on the front of the wireless receiver.

LED Colour	Status
Blinking green	Connecting In progress
Green	Connected successfully
Red	Bad connection, or the receiver is in standby
Off	Power cable not connected

Manual connection

If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the receiver. If this is the case, connect them in the following order.

1. a Press the Power button on the sound bar to turn it off.
2. b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless receiver is blinking green.

1. c Press the Power button on the sound bar to turn it on.
2. d When the connection is established, you will see the LED light on the front of the wireless receiver light up green.

Note

Keep the rear speakers at least 30 cm away from the TV or monitor. To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless receiver and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers, microwave ovens, etc.).

Setting up surround sound